Holzbiologie und Holzprodukte

2018



  • Beck G, Strohbusch S, Larnøy E, Militz H, Hill C (2018) Accessibility of hydroxyl groups in anhydride modified wood as measured by deuterium exchange and saponification. In: Holzforschung 72 (1): 17-23, DOI: 10.1515/hf-2017-0059

  • Behr G, Bollmus S, Gellerich A, Militz H (2018) Improvement of mechanical properties of thermally modified hardwood through melamine treatment. In: Wood Mater Sci Eng 13: 262-270, DOI: 10.1080/17480272.2017.1313313

  • Behr G, Bollmus S, Gellerich A, Militz H (2018) The influence of curing conditions on the properties of European beech (Fagus sylvatica) modified with melamine resin assessed by light microscopy and SEM-EDX. In: Int Wood Prod J 9: 22-27, DOI: 10.1080/20426445.2017.1416738

  • Behr G, Gellerich A, Bollmus S, Brinker S, Militz H (2018) The influence of curing conditions on properties of melamine modified wood. In: Eur J Wood Wood Prod 76: 1263–1272, DOI: 10.1007/s00107-018-1290-3

  • Brischke C, Bornemann T, Rapp AO (2018) Monitoring of a cold roof thatched with reed (Phragmites australis) Using wooden substitute sensors for moisture content measurements. In: Restor Build Monument 22 (4-6): 1-9, DOI: 10.1515/rbm-2016-0004

  • Brischke C, Emmerich L, Frühwald Hanson E, Meyer-Veltrup L, Niklewski J (2018) Wie lange halten Holzkonstruktionen im Außenbereich? In: Holz-Zentralblatt 22: 522-523

  • Brischke C, Hesse C, Meyer-Veltrup L, Humar M (2018) Studies on the material resistance and moisture dynamics of Common juniper, English yew, Black cherry, and Rowan. In: Wood Mater Sci Eng 13 (4): 1-9, DOI: 10.1080/17480272.2017.1356371

  • Bütün FY, Mayer AK, Ostendorf K, Gröne OE, Krause KC, Schöpper C, Mertens O, Krause A, Mai C (2018) Recovering fibres from fibreboards for wood polymer composites production. In: Int Wood Prod J 9 (2): 1-8, DOI: 10.1080/20426445.2018.1462965

  • Fleckenstein M, Biziks V, Mai C, Militz H (2018) Modification of beech veneers with lignin phenol formaldehyde resins in the production of laminated veneer lumber (LVL). In: Eur J Wood Wood Prod 76 (3): 843–851, DOI: 10.1007/s00107-017-1275-7

  • Gellerich A, Brischke C, Militz H, Klüppel A (2018) Resistance of modified wood against marine borers. In: Holztechnologie 59 (4): 5-11

  • Hosseinpourpia R, Adamopoulos S, Mai C (2018) Effects of acid pre-treatments on the swelling and vapor sorption of thermally modified Scots pine (Pinus sylvestris L.) wood. In: Bioresources 13 (1): 331-345, DOI: 10.15376/biores.13.1.331-345

  • Hünnekens B, Avramidis G, Ohms G, Krause A, Viöl W, Militz H (2018) Impact of plasma treatment under atmospheric pressure on surface chemistry and surface morphology of extruded and injection-molded wood-polymer composites (WPC). In: Appl Surf Sci 441: 564–574, DOI: 10.1016/j.apsusc.2018.01.294

  • Källbom S, Altgen M, Militz H, Wålinder M (2018) Sorption and surface energy properties of thermally modified spruce wood components. In: Wood Fiber Sci 50 (3): 346-357

  • Kielmann BC, Butter K, Mai C (2018) Modification of wood with formulations of phenolic resin and iron-tannin-complexes to improve material properties and expand colour variety. In: Eur J Wood Wood Prod 76: 259-267, DOI: 10.1007/s00107-017-1180-0

  • Klüppel A, Mai C (2018) Effect of seawater wetting on the weathering of wood. IN: Eur J Wood Wood Prod 76: 1029-1035, DOI: 10.1007/s00107-017-1268-6

  • Koddenberg T, Militz H (2018) Morphological imaging and quantification of axial xylem tissue in Fraxinus excelsior L. through X-ray micro-computed tomography. In: Micron 111: 28-35, DOI: 10.1016/j.micron.2018.05.004

  • Köhler R, Ohms G, Militz H, Viöl W (2018) Atmospheric pressure plasma coating of bismuth oxide circular droplets. In: Coatings 8: 1-9, DOI: 10.3390/coatings8090312

  • Korte H, Koch G, Krause KC, Koddenberg T, Siemers S (2018) Wood nails to fix softwoods: characterization of structural deformation and lignin modification. In: Eur J Wood Wood Prod 76 (3): 979–988, DOI: 10.1007/s00107-018-1288-x

  • Krause KC, Sauerbier P, Koddenberg T, Krause A (2018) Utilization of recycled material sources for wood-polypropylene composites: Effect on internal composite structure, particle characteristics and physico-mechanical properties. In: Fibers -: 1-18, DOI: 10.3390/fib6040086

  • Lloyd JD, Brischke C, Bennett R, Taylor A (2018) Dual borate and copper naphthenate treatment of bridge timbers – potential cost savings by various performance enhancements. In: Wood Mater Sci Eng 13 (3): 122-128, DOI: 10.1080/17480272.2017.1383512

  • Meyer-Veltrup L, Brischke C, Niklewski J, Frühwald Hansson E (2018) Design and performance prediction of timber bridges based on a factorization approach. In: Wood Mater Sci Eng 13 (3): 167-173, DOI: 10.1080/17480272.2018.1424729

  • Nelis PA, Michaelis F, Krause KC, ·Mai C (2018) Kiri wood (Paulownia tomentosa): can it improve the performance of particleboards? IN: Eur J Wood Wood Prod 76 (2): 445-454, DOI: 10.1007/s00107-017-1222-7

  • Niklewski J, Brischke C, Frühwald Hansson E, Meyer‑Veltrup L (2018) Moisture behavior of weathered wood surfaces during cyclic wetting: measurements and modeling. In: Wood Sci Technol 52: 1431–1450, DOI: 10.1007/s00226-018-1044-8

  • Peters F, Gelker M, Fleckenstein M, Militz H, Ohms G, Viöl W (2018) Decrease of the surface pH of maple and the production of nitrate by three pulsed dielectric barrier discharges. In: Wood Sci Technol 52: 1495–1510, DOI: 10.1007/s00226-018-1036-8

  • Schlotzhauer P, Bollmus S, Militz H (2018) Visual and machine strength grading characteristics of six European hardwoods. In: Holztechnologie 59 (6): 5-14

  • Schlotzhauer P, Wilhelms F, Lux C, Bollmus S (2018) Comparison of three systems for automatic grain angle determination on European hardwood for construction use. In: Eur J Wood Wood Prod 76 (3): 911–923, DOI: 10.1007/s00107-018-1286-z

  • Sharapov E, Brischke C, Militz H, Smirnova E (2018) Combined effect of wood moisture content, drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce (Picea abies (L.) Karst.). In: Wood Mater Sci Eng -: 1-7, DOI: 10.1080/17480272.2018.1557249

  • Sharapov E, Brischke C, Militz M, Smirnova E (2018) Effects of white rot and brown rot decay on the drilling resistance measurements in wood. In: Holzforschung 72 (10): 905–913, DOI: 10.1515/hf-2017-0204

  • Wallenhorst L, Gurău L, Gellerich A, Militz H, Ohms G, Viöl W (2018) UV-blocking properties of Zn/ZnO coatings on wood deposited by cold plasma spraying at atmospheric pressure. In: Appl Surf Sci 434: 1183-1192, DOI: 10.1016/j.apsusc.2017.10.214

  • Wallenhorst L, Rerich R, Vovk M, Dahle S, Militz H, Ohms G, Viöl W (2018) Morphologic and chemical properties of PMMA/ATH layers with enhanced abrasion resistance realised by cold plasma spraying at atmospheric pressure. In: Adv Cond Matter Phys 2018: 1-11, DOI: 10.1155/2018/3539417

  • Wehsener J, Brischke C, Meyer-Veltrup L, Hartig J, Haller P (2018) Physical, mechanical and biological properties of thermo-mechanically densified and thermally modified timber using the Vacu3-process. In: Eur J Wood Wood Prod 76 (3): 809–821, DOI: 10.1007/s00107-017-1278-4

  • Wentzel M, Altgen M, Militz H (2018) Analyzing reversible changes in hygroscopicity of thermally modified eucalypt wood from open and closed reactor systems. In: Wood Sci Technol 52 (4): 889–907, DOI: 10.1007/s00226-018-1012-3

  • Wentzel-Vietheer M, Washusen R, Downes GM, Harwood C, Ebdon N, Ozarska B, Baker T (2018) Prediction of non-recoverable collapse in Eucalyptus globulus from near infrared scanning of radial wood samples. In: Eur J Wood Wood Prod 71 (6): 755–768, DOI: 10.1007/s00107-013-0735-y

  • Yao Y, Gellerich A, Zauner M, Wang X, Zhang K (2018) Differential anti-fungal effects from hydrophobic and superhydrophobic wood based on cellulose and glycerol stearoyl esters. In: Cellulose 25 (2): 1329–1338, DOI: 10.1007/s10570-017-1626-x