In brief descriptions, highlights of our lab equipment and instrumentation are listed below. Please feel free to contact us if you have any questions!
In the optical trap, the 21 W 1064 nm laser can be used to generate one, two or four traps simultaneously with high trapping forces. The set-up is combined with a pressure driven microfluidic pump and a confocal microscope with 488 nm, 532 nm and 638 nm lasers.
Funded by the ERC.contact: Anna Schepers, Charlotta Lorenz, Julia Kraxner
|Olympus IX71 TIRF microscope|
With the IX71 Olympus TIRF setup, we can image a fluorescent sample close to the substrate independent of a potentially high fluorophore concentration in the bulk. For example, the setup enables us to observe the dynamic instability of microtubules. The setup is equipped with a 488-nm laser, a 561-nm laser, an oil immersion TIRF objective (NA = 1.45, 150x) and a digital CMOS camera.
Funded by the DFG.contact: Charlotta Lorenz, Laura Aradilla Zapata
|Olympus IX73 microscope with FCS modality|
The IX73 Olympus FCS setup has a conventional epi-fluorescence component and a home-built confocal component for high imaging flexibility. With the confocal component, fluorescence fluctuation techniques, such as FCS, PCH or FCCS can be employed. The setup is equipped with a 491-nm and a 532-nm laser for two color measurements, a 60x water immersion objective and two τ-SPAD detectors for FFS and a digital CMOS camera for epi-fluorescence recordings.
Funded by the DFG.contact: Eleonora Perego
|Olympus IX81 confocal microscope|
The IX81 confocal setup offers both widefield epi-fluorescence and confocal fluorescence microscopy. It is equipped with objectives up to a magnification of 100x (oil immersion, NA=1.4), laser lines of 405nm, 458 nm, 488 nm, 515 nm, 561 nm and 635 nm and a CMOS camera. In combination with a top stage incubator it enables multi-color fluorescence live cell imaging.
Funded by the DFG.contact: Ulrike Rölleke, Anna Blob
|Olympus IX81 live cell microscope|
The IX81 cell setup offers widefield epi-fluorescence microscopy. Currently, it is equipped with objectives up to a magnification of 60x (oil immersion, NA=1.49) and in combination with a Retiga 6000 CCD camera with very small pixel size it is suitable for Traction Force Microscopy (TFM). The implemented top stage incubator allows the investigation of living cells. Additionally, the microscope is equipped with a Chiaro nanoindentor from Optics11 that measures elastic properties like the Young modulus of samples.
Funded by the DFG.contact: Anna Zelena
|Olympus IX83 with Alvéole PRIMO photo patterning setup|
The photo patterning setup allows for contact-less micro patterning of proteins. A virtual mask is generated through which a photoactive reagent locally degrades a passivation layer on the sample surface. Micrometer scale patterns of different shapes and sizes can be generated and used for cell culture or protein interaction studies.
Funded by the DFG.contact: Anna Schepers, Anna Zelena
|Olympus BX43 and BX63 upright fluorescence microscopes|
On both of our upright microscopes, the Olympus BX43 and the Olympus BX63, 40x and 60x water immersion objectives allow imaging on fluorescent samples on opaque or strongly diffracting surfaces.contact: Anna Schepers, Ruth Meyer
|Xenocs XEUSS 2.0|
The XEUSS 2.0 is an x-ray scattering instrument by Xenocs. The Cu K alpha micro x-ray source generates photons of 8 keV and a flux of approximately 40Mph/s. Scatterless slits set the pencil beam size to 800x800 µm2 or 500x500 µm2 at the sample. The sample chamber enables ambient as well as vacuum conditions. The sample stage accepts various sample holders for scanning in two directions. Mounts for dried samples in different sizes are available. For liquid samples, the setup is equipped with sample holders for batches of glass capillaries and a low noise flow cell. The 1M Pilatus x-ray detector, a 2d hybrid pixel detector, is positioned with a distance between 0.1 to 6 m, enabling WAXS and SAXS.
Funded by the DFG.contact: Charlotte August, Jan-Philipp Burchert, Manuela Denz
Cell culture labs
|Cell culture labs|
We have two cell culture labs. The bacterial lab is mainly used to grow genetically modified E.coli cultures and thereof preparing recombinant proteins (mainly intermediate filaments), which are further used in a variety of experiments. In the mammalian cell culture lab we culture epithelial cells, fibroblasts and blood platelets. Using techniques like liposome-based transfection or electroporation we specifically modify the cells and investigate them using live cell imaging techniques or various fixation methods combined with antibody staining.contact: Susanne Bauch, Ulrike Rölleke
|Wet labs for sample preparation|
We have two preparation labs which are equipped with two ultra centrifuges, a refrigerated centrifuge, a plasma cleaner, spin coater, a nanodrop, a thermocycler, a -80°C freezer and clean bench for microfluidics.contact: Susanne Bauch or any lab member
|Nanoscribe Photonic Professional GT2|
In the cleanroom, we are currently installing a Photonic Professional GT2 by Nanoscribe, a microfabriation system for ultra-precise and rapid 3d printing. It combines the precision of two-photon polymerization with a straightforward 3d printing workflow for nano- and microscale structures, e.g. for microfluidics or microoptics. It offers high-speed 3D microfabrication of lateral feature sizes down to typ. 160 nm, but also includes a large features solution set for millimeter-sized parts (up to 100 × 100 × 8 mm³).
Funded by the DFG (MBExC).contact: Charlotte August, Peter Luley